Have you ever witnessed chalk solid substance around your bathroom taps and fittings? These stains are called limescale or calcium carbonate that can look nasty and cause serious health problems.
Since taps and other bathroom fittings receive the most contact with your hands, they can get
dirty and contaminated quickly. Thus, it is imperative to get rid of built-up limescale using safe and sound products.
In case you are prepping your rental house for the inspection, then thoroughly check every nook and corner, especially these areas. You can also hire professionals for an affordable bond cleaning in Ipswich to help you get the bond back at the end of the tenancy.
You can also get rid of limescale from taps and bathroom fittings using natural or chemical-free cleaning products. Here are some great tips that will make things super easy for you:
1. Use Lemon to Tackle Limescale
Limescale is the build-up of calcium carbonate, which is hard to remove. You need to put a lot of effort to get rid of chalk-like stains from your faucets and other shiny surfaces.
However, you don’t need to use fancy cleaning products available on the market. Lemons can work wonder because it contains acidic properties to remove tough stains and grime, including limescale. Follow these steps while using this trick:
Cut the lemon into halves and rub it around the tap and bathroom fittings.
Make sure the lemon juice squeezes out well as it will loosen up the hard deposits quickly and easily.
Take another half and put it on the affected area and secure it using a plastic wrapper and a rubber band around the faucet’s neck. Let it covered for 3-5 hours or overnight.
Remove the plastic wrapper and lemon and clean the surface using a cleaning sponge.
Rinse it off with water.
2. Use White Vinegar
You can also use white vinegar to remove hard deposits of calcium carbonate from your taps, bathtub and other bathroom fittings. This is a super ingredient that can help you get rid of stubborn stains without causing any harm to the environment.
To remove limescape from the spout or water outlet, fill a cap with white vinegar and put it on the spout. Make sure the outlet is merged in the solution. You can secure the cap with an elastic band or tape. Let it soak overnight.
For the upper parts of your faucet, you need to soak the cloth or cotton wool in white vinegar solution and wrap it around the tap. It is good to leave at least 3 hours to break down the built-up limescale.
After that, remove the cloth and scrub the tap to get rid of residue.
Tip: Do not use lemon or white vinegar on plated taps, such as gold and chrome.
3. Clean A Toilet Bowl With Vinegar Solution
You can easily remove limescale from the toilet bowl using the white vinegar solution. If the built-up is on a smaller area, you can mix vinegar with water in an empty spray bottle and apply the mixture onto the stain and brush it away.
For larger areas, pour the entire bottle of vinegar around the toilet bowl and cover it with a lid. Let it sit for a few hours or overnight.
Scrub the leftover hard deposits using a toilet brush. Clean the rim by spraying the cleaning solution and rubbing it with a brush.
It is good to consider a
complete bathroom cleaning guide if you are preparing your rented property for the rental inspection. Make sure you clean according to the checklist so that you can impress your fussy landlord.
4. Gently Remove Limescale from Plated Taps and Fittings
Metal plated taps and bathroom fittings are in trend these days. According to
professional bond cleaners in Ipswich, you should avoid using an acidic cleaner or abrasive scrub as it can easily damage the surface.
Don’t even use lemon or white vinegar solution on brash, nickel or chrome-plated taps. It can also get scratches from coarse cleaning cloths.
To prevent the built-up, you can daily clean the faucets and other bathroom fittings. Try to use a dry cloth or paper towel while wiping these areas. You need to ensure that taps do not collect hard water stains or moisture.
You can also use hot soapy water to get rid of stains from your plated faucets.
5. Baking Soda For Sparkling Results
Baking soda is one of the best homemade cleaning agents that can help you get rid of almost all stains, including limescale. Whether you have a plated tap or not, baking soda can help you bring back the lost shine of your faucets, bathtub, toilet bowl and other bathroom fittings with ease.
Make a paste of baking soda and water. Dip the cleaning sponge into the solution and rub it over the stained surface. Leave it for a few minutes before wiping it off using a dry cloth.
Conclusion
There is no rocket science behind removing built-up limescale from taps and bathroom fittings. Make sure you use eco-friendly products instead of hazardous chemicals while sprucing up your house. It is good to hire trained people for a detailed bond cleaning in Ipswich and retrieve the full bond back.
